Differential to Single Ended Signal Converter 1000KHz
The function of a differential to single-ended signal converter: This module receives six differential signals viz +A, -A, +B, -B, +Z, -Z signals (3-10 or 10-24 VDC) and converts differential signal into single-ended signals with pulse amplitude equal to user-supplied voltage anything between 30-5 VDC. Outputs are optically isolated from input encoder signals.
Technical specifications
- Input signal voltage: 3-10 VDC OR 10-24VDC
- Max. input current: 5 mA
- Max. output voltage: 5-30 VDC
- Min. output voltage: 5.0 VDC
- Max. load per output point: 200 mA
- Continuous power dissipation at (or below) 25°C free-air temperature: 200mW
- Input to output electrical isolation: 3.55 KV
- Max. Voltage drop in output voltage: 0.5 V @ 5mA load
- Resistance, input to output: 100 GΩ
- Max pulse frequency: 1000 KHz
Features
- DIN rail mountable
- Three (A, B, Z) outputs module
- LED indication of output signals
- Reduces high-frequency noise and gives clear square wave output
- Sink and Source type outputs
Applications
a) For connecting simulated encoder signals from inverters/Servo drives to PLC inputs
b) To convert RS422 signal into single ended signal
c) To shift level of the square wave input to the desired level
d) Conversion of sink type encoder to source type outputs
b) To convert RS422 signal into single ended signal
c) To shift level of the square wave input to the desired level
d) Conversion of sink type encoder to source type outputs
Applications Examples
|
Sr.No |
Encoder PPR |
Motor RPM |
Pulse Frequency |
Suitable Convertor/span> |
| 1 |
1000 |
3000 |
50.00 KHz |
1000 KHz |
| 2 |
2500 |
4000 |
166.67 KHz |
1000 KHz |
| 3 |
3000 |
3000 |
150.00 KHz |
1000 KHz |
| 4 |
5000 |
4000 |
266.67 KHz |
1000 KHz |
Standards/Approvals
CE Certified, PCB: IEC61373, Terminals: UL/CE
Optoisolator: UL, Profile & end plates: CE
Optoisolator: UL, Profile & end plates: CE
